Lopi Yankee Bay Pellet Insert - Manual (Page 25)

Maintenance
2 5
Travis Industries 4 0 5 0 5 0 9 1 0 0 - 0 1 1 4 5
Bi-Weekly Maintenance (or every 10 bags of pellets)
Clean the Heat Exchange Tubes
With the door closed, insert the included
tool into the hole on the heat exchanger
cleaning rod. Move the heat exchange
cleaner up and down several times.
Keep the door closed so the
flyash does not enter the room.
WARNING:
The front of the
heater becomes very
hot during operation.
Wait until the heater
has cooled before
cleaning the heat
exchange tubes.
Heat Exchanger
Cleaning Rod
Vacuum Hopper
Run the heater until the pellets run out. Open the hopper and vacuum out the entire hopper. The
dust and any other debris near the bottom should be removed to prevent excessive build-up.
Cleaning the Optional Plated Surfaces
Fingerprints or other marks left on the plated surfaces may become etched in place if they are not
wiped clean prior to turning the stove on. Clean the surface with denatured alcohol and a soft cloth
(make sure the heater is cool). Other cleaners may leave a film that may dull the finish.