La Crosse Technology Radio Controlled Projection Alarm WT-5110 User Manual
Page 4
4
QUICK SET-UP GUIDE
Hint: Use good quality Alkaline Batteries and avoid rechargeable batteries.
1. We recommend beginning the set-up procedure at night when the
WWVB signal is easiest to receive.
2. It is also highly recommended to set the projection alarm in a window
or other area free of interference in the area of your home that is
closest to Colorado (the source of the WWVB signal).
NOTE: The above steps are not required but can help the projection
alarm receive the signal faster.
3. Place the batteries into the projection alarm clock.
4. DO NOT PRESS ANY BUTTONS FOR 15 MINUTES.
NOTE: It is important to not press any buttons after inserting batteries as
this will interrupt the WWVB search sequence.
In this time the display will show both the indoor temperature and humidity. If the
station does not display both indoor temperature and indoor humidity after the 15
minutes please retry the set up as stated above. After both indoor temperature
and indoor humidity are displayed for 15 minutes you can place your projection
alarm in your desired location.
To complete the set up of your temperature station after the 15 minutes have
passed please follow the steps beginning on page 6.