Lincoln Electric K2391-1 - Manual

Description
Output Input
Power REAM™
Robotic Torch Maintenance Center
Maintain high quality and productivity in your MIG robotic welding cell with the
Power REAM from Lincoln Electric. This automatic nozzle cleaning station removes
and reduces spatter accumulation for improved performance. The Power REAM
clamps the torch nozzle firmly in place while a constant torque air-motor drives a
high-speed reamer, cutting away spatter from the nozzle, contact tip, and gas
diffuser. A vortex action anti-spatter sprayer provides a radial spray pattern to
uniformly coat the inside of the nozzle for superior protection against weld spatter
buildup.
Publication E10.110 11/04
www.lincolnelectric.com
Processes
Reamer Sprayer Wire Clipper
Advantage Lincoln
Recommended General Options
Power Ream Robot Cable, Remote Power Ream Reservoir Kit,
Reaming Bit, Anti-Spatter Fluid, Power Ream Utility Stand
Order
K2391-1 Power REAM
Base Unit Includes
• Reaming Station (5/8” reamer bit included)
• Spray System
• Wire Cutter
• 20 ft. (6.0m) Input Cable
TECHNICAL SPECIFICATIONS
AUTOMATED SOLUTIONS
REAMER SPRAYER
24
VDC
Pressure
• The Power REAM delivers features unmatched in current competitive
models. The design of the Power REAM offers a simple pushbutton
“No Error” programming technique, with the added advantage of
interactive process monitoring.
• The Power REAM is the only reamer to offer an automatic retry
feature. It detects when excessive spatter builds up, preventing the
reamer from fully extending into the nozzle. When this occurs, the
reamer retracts and automatically retries.
• Diamond-shaped clamp design provides a positive, self-centering
grip on all nozzle sizes.
• Input and output signals are easily configured, allowing easy
integration for all makes and models of robot systems.
• Maintenance features such as on-board diagnostic indicator lights
and error codes allow trouble-free setup, fast maintenance, and easy
replacement of standard components.
• One year warranty on parts and labor.
• Standard integrated wire clipper provides consistent wire stickout
and removes the ball end of the welding wire to provide superior arc
starting performance for .030”- 1/16” (0.8-1.6mm) solid wires.
Input Air Dimensions
Product Product Pressure and H x W x D Net Weight
Name Number Input Power Flow Rated Output Input Current inches (mm) lbs (kg)
with reservoir attached
Power REAM K2391-1 24V DC 80 PSI 1100 rpm, 0.65 HP 0.50A DC 24.9 x 8.9 x 13.2 62
15 SCFM (633 x 228 x 337) (28)
without reservoir
19.5 x 8.9 x 13.2
(495 x 228 x 337)
CUTTER