Linksys WVC54GCA - Manual (Page 12)

Chapter 3
Setting Up and Mounting the Camera
11 Wireless-G Internet Home Monitoring Camera
Camera Head Tilting
After the Camera is assembled, you can tilt the Camera
head on its ball joint using the lock nut on the camera
stand. Loosen the lock nut, tilt the camera head as desired,
then tighten the lock nut to secure the position.
Lock Nut
Camera Tilting Feature with Stand Option
The installation of the Wireless-G Internet Home
Monitoring Camera is complete. Go to Chapter
4: Installing and Using the Camera Utility, page 12.
For information about advanced configuration
using the Camera’s Web-based Utility, go to Chapter
5: Advanced Configuration with the Web-based
Utility, page 20.