Land Pride Rear Blades RBT4096 - Manual (Page 20)

18
Section 4: Adjustments
RBT4084, RBT4096 & RBT40108 Rear Blades 301-206M 6/12/13
Table of Contents
Blade Tilt
!
CAUTION
Avoid injury from falling blade. Always check to make sure all
hardware is secured properly before rotating blade.
Manual Tilt Adjustment
Refer to Figure 2-4 on page 13:
The blade end can be tilted manually by as much 15
degrees with the ratchet jack.
1. Set ratchet lock and pump lever back and forth to
raise one end of the blade higher than the other end.
2. Reposition ratchet lock and pump lever back and
forth to tilt blade in the opposite direction.
Hydraulic Tilt Adjustment
Refer to Figure 2-3 on page 12:
The blade end can be tilted hydraulically with the tilt
cylinder by as much as 15 degrees.
1. If the tilt cylinder is controlled by the hydraulic
selector valve, make certain the valve is set to
operate that cylinder.
2. Operate tractor control lever to change blade tilt by
as much as 15 degrees.