Land Pride RCMB6010 User Manual
Page 2
Land Pride
RCB6010 & RCB6015 (540 RPM) and RCMB6010 & RCMB6015 (1000 RPM) Rotary Cutters 318-263M
9/04/08
©
Copyright 2008 All rights Reserved
Land Pride provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Land
Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves
the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
Land Pride is a registered trademark.
All other brands and product names are trademarks or registered trademarks of their respective holders.
Printed in the United States of America.
Table of Contents
Important Safety Information . . . . . . . . . . .1
Safety at All Times . . . . . . . . . . . . . . . . . . . . . . . . . 1
Look For The Safety Alert Symbol . . . . . . . . . . . . . 1
Safety Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Introduction . . . . . . . . . . . . . . . . . . . . . . .10
Owner Assistance . . . . . . . . . . . . . . . . . . . . . . . . 10
Section 1: Preparation and Set-up . . . . .11
Tractor Requirements . . . . . . . . . . . . . . . . . . . . . 11
Before You Start . . . . . . . . . . . . . . . . . . . . . . . . . 11
Dealer Assembly & Preparations . . . . . . . . . . . . . 11
Hitch Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Wing Axle Assembly . . . . . . . . . . . . . . . . . . . . . . 12
Hydraulic Plumbing . . . . . . . . . . . . . . . . . . . . . . . 12
Hitch Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Tractor Hook-up to Swivel Clevis Hitch . . . . . . . . 13
Tractor Hook-up to Bar-Tite Clevis Hitch . . . . . . . 14
Driveline Hook-up . . . . . . . . . . . . . . . . . . . . . . . . 14
Hydraulic Hook-up . . . . . . . . . . . . . . . . . . . . . . . . 15
Unhooking From the Cutter . . . . . . . . . . . . . . . . . 16
Section 2: Operating Instructions . . . . . .17
Pre-start Checklist . . . . . . . . . . . . . . . . . . . . . . . . 17
Cutter Set-up For Transporting . . . . . . . . . . . . . . 17
Transporting The Cutter . . . . . . . . . . . . . . . . . . . . 18
Cutter Set-up For Field Operation . . . . . . . . . . . . 18
Operating Speed & Turning Angle . . . . . . . . . . . . 18
Optional Manual Wing Lift (Winch) . . . . . . . . . . . . 19
General Operating Instructions . . . . . . . . . . . . . . 19
Section 3: Adjustments . . . . . . . . . . . . . .21
Section 4: Maintenance & Lubrication . .22
General Maintenance Information . . . . . . . . . . . . 22
Cutter Blade Maintenance . . . . . . . . . . . . . . . . . . 22
Driveline Protection . . . . . . . . . . . . . . . . . . . . . . . 23
Clutches With 4 Adjusting Nuts . . . . . . . . . . . . . . 23
Clutch Run-In Procedure . . . . . . . . . . . . . . . . . 23
Clutch Disassembly & Assembly Procedure . . 23
Clutches With 8 Adjusting Nuts . . . . . . . . . . . . . . 25
Clutch Run-In Procedure . . . . . . . . . . . . . . . . . 25
Clutch Disassembly & Assembly Procedure . . 25
Skid Shoe Maintenance . . . . . . . . . . . . . . . . . . . . 26
Center Skid Shoe . . . . . . . . . . . . . . . . . . . . . . 26
Wing Skid Shoe . . . . . . . . . . . . . . . . . . . . . . . . 26
Weight Box Skid Shoe . . . . . . . . . . . . . . . . . . . 26
Tractor Maintenance . . . . . . . . . . . . . . . . . . . . . . 27
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Lubrication Points . . . . . . . . . . . . . . . . . . . . . . . . 28
Axle Hub Bearing . . . . . . . . . . . . . . . . . . . . . . 28
Adjustable Turnbuckle . . . . . . . . . . . . . . . . . . . 28
Main Hitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Wing Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Double Swivel Clevis Hitch . . . . . . . . . . . . . . . 29
Bar-Tite Clevis Hitch . . . . . . . . . . . . . . . . . . . . 29
Divider Box . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Gearbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Intermediate Driveline Joints . . . . . . . . . . . . . . 30
Conventional Driveline Profile Tubes . . . . . . . . 31
Conventional Driveline Joints & Shields . . . . . 31
CV Input Driveline Profile Tubes . . . . . . . . . . . 32
CV Input Driveline Joints & Shields . . . . . . . . . 32
Wing Driveline Profile Tubes . . . . . . . . . . . . . . 33
Wing Driveline Joints & Shields . . . . . . . . . . . . 33
Section 5: Specifications & Capacities . .34
Section 6: Features and Benefits . . . . . .35
Section 7: Troubleshooting . . . . . . . . . . .36
Section 8: Appendix . . . . . . . . . . . . . . . . .37
Torque Values Chart . . . . . . . . . . . . . . . . . . . . . . 37
Tire Inflation Chart . . . . . . . . . . . . . . . . . . . . . . . . 37
Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39