Safety labels, 130c, 240c – Land Pride RCMB6010 User Manual
Page 6
4
RCB6010 & RCB6015 (540 RPM) and RCMB6010 & RCMB6015 (1000 RPM) Rotary Cutters 318-263M
9/04/08
Land Pride
Important Safety Information
818-045C
Pinch Point
Warning
818-130C
Caution! Use
540 rpm PTO
only
818-240C
Caution! Use
1000 rpm PTO
only
23579
23578
Safety Labels
Your cutter comes equipped with all safety labels in place. They
were designed to help you safely operate your implement. Read
and follow their directions.
1.
Keep all safety labels clean and legible.
2.
Replace all damaged or missing labels. To order new
labels go to your nearest Land Pride dealer or visit our
dealer locator at landpride.com.
3.
Some new equipment installed during repair requires
safety labels to be affixed to the replaced component as
specified by Land Pride. When ordering new components
make sure the correct safety labels are included in the
request.
4.
Refer to this section for proper label placement.
To install new labels:
a.
Clean the area the label is to be placed.
b.
Spray soapy water on the surface where the label is to
be placed.
c.
Peel backing from label. Press firmly onto the surface.
d.
Squeeze out air bubbles with the edge of a credit card.