LevelOne PLI-2000 - Manual (Page 5)

Homeplug Configuration Utility User Guide
Network dialog screen
The Network dialog screen provides detailed information about your powerline network.
The text list box shows all Homeplug devices found on your powerline network identified by
their MAC addresses. A second column indicates their data rate measurements in Mbps.
Press Scan Powerline Network button to refresh the listed information.
Figure 3 Network dialog screen
Important :
In case a Homeplug device in your home is not listed in the screen above, make sure that
its network password has not been made private previously with a different password than
your current private network password.
You can always reset a Homeplug network password to the universal one by running the
Homeplug Configuration Utility on the PC attached to this device and choose “HomePlug”
as the network password.
4