Lanzar Car Audio Lanzar Vibe VBD1800 - Manual (Page 6)

6
5. Do not expose the front panel to high
temperatures or direct sunlight in
anywhere.
6. Keep away any volatile agents (e.g.
benzene, thinner or insecticides) from
touching the surface of the front panel.
7. Do not attempt to disassemble the
front panel.
PANEL ANGLE ADJUSTMENT
(OPTIONAL)
You can adjust the panel angle for easy
viewing.
Adjusting faceplate angle:
When the front panel is in State 3, press
the button to make the panel slide
open, and then adjust the panel angle
using the angle adjustment switch.
The switch is on the right of the housing.
Adjustment may be made from 0 to 2.
Note:
• Firmly slide the switch until it clicks.
• Do not apply excessive force to the
panel under settings 1 or 2.
• Set the angle adjustment switch to “0”
before removing the panel.
USING THE DETACHABLE FRONT PANEL
To Reinstall the Front Panel
1. When the panel bracket is in slide up
position, insert left side of the front
panel to its proper position and push
right side into the panel bracket, a
‘click’ sound should be heard.
2. Note that if the front panel fails to lock
in position properly, press control
button may not function and LCD
display may be missing some
segments. Pressing the button and
then reinstall the front panel again.
3. Note that you cannot install the front
panel in the following method.
Precautions when Handling
1. Do not drop the front panel.
2. Do not put pressure on the display or
control buttons when detaching or
reinstalling the front panel.
3. Do not touch the contacts on the front
panel or on the main unit body. It may
result in poor electrical contact.
4. If any dirt or foreign substances
adhered on the contacts, they can be
removed with a clean and dry cloth.
Front Panel
0 1 2
0 1 2
0
2
1