Lanzar Car Audio Lanzar Vibe VBD300 - Manual (Page 11)

11
SPECIFICATION
GENERAL
Power Supply Requirements : DC 12 Volts, Negative Ground
Chassis Dimensions : 178 (W) x 155 (D) x 50 (H)
Tone Controls
- Bass (at 100 Hz)
: +10 dB / –10 dB
- Treble (at 10 KHz) : +10 dB / –10 dB
Maximum Output Power
- Version v
: 7W x 4 (ch) or 25W x 2 (ch)
- Version z : 25W x 4 (ch)
- Version y : 40W x 4 (ch)
CD PLAYER
Signal to Noise Ratio : More than 60 dB
Channel Separation : More than 60 dB
Frequency Response : 20 Hz - 20 KHz
RADIO
For 3 Bands For 2 Bands For 2 Bands
(Europe) (Europe) (U.S.A.)
FM FM FM
Frequency Coverage : 87.5 to 108 MHz 87.5 to 108 MHz 87.5 to 107.9 MHz
IF : 10.7 MHz 10.7 MHz 10.7 MHz
Sensitivity (S/N = 30 dB) : 3
µ
V 3
µ
V 3
µ
V
Stereo Separation : > 30 dB > 30 dB > 30 dB
MW MW AM
Frequency Coverage : 522 to 1620 KHz 522 to 1620 KHz 530 to 1710 KHz
IF : 450 KHz 450 KHz 450 KHz
Sensitivity (S/N = 20 dB) : 32 dBu 32 dBu 32 dBu
LW
Frequency Coverage : 144 to 290 KHz
IF : 450 KHz
Sensitivity (S/N = 20 dB) : 35 dBu