Linksys PC22604 - Manual (Page 28)

47
ProConnect II ® Series
46
Layer 2 Management 4-Port Gigabit Ethernet Switch
2. Highlight the desired option, and then press the Enter key.
3. If you selected Set Learning Limit, the Enter New Limit screen appears.
4. Type the new limit, and press the Enter key.
IP Networking
If you select IP Networking from the Advanced Management screen, the IP
Networking screen will appear.
From the IP Networking screen, you can:
• View or change IP and RIP Settings.
• View or change ARP Table Parameters.
• View or change Routing Table Parameters.
• View or change DHCP Gateway Settings.
• View or change Ping Settings.
5. After reviewing this information, press the Esc key until you return to the
desired screen.
Per Port MAC Limit
If you select Per Port MAC Limit from the Port Perspective screen, a screen
similar to the following one appears.
1. To specify MAC learning options for a MAC port, use the Up and Down
Arrow keys to highlight a port, then press the Enter key. A MAC Learning
Options screen similar to the following appears.