Leggett & Platt P-2000 - Manual (Page 4)

3
INSTALLATION
STEP 2
Insert casters into the caster sockets at the
bottom of each leg. If necessary, strike the
center of the caster lightly with a hammer.
NOTE: To avoid damage to flooring,
casters must be installed before
operating the bed. Failure to attach
casters may void warranty.
STEP 1
Remove and discard the packing materials from the bottom of the base unit. You will see the mattress
retainer bracket and headboard brackets attached to the side rail of the bed. Remove these items and
set aside for the moment. Remove bagged parts and the power cord from the underside of the bed.
HEADBOARD BRACKET
MATTRESS RETAINER BRACKET