Largan EASY 200 - Manual (Page 47)

8. Download Images via USB DISK
1. Switch the camera to the
Communication Setting mode and
press the "
OK " button. The LCD monitor
will show "INSERT CABLE" (p. 27).
2. Attach the USB cable to the USB
terminal on the camera.
3. Plug the other end of the USB
cable to the USB port on the PC.
4. After a moment, Windows will find
new hardware, and install the driver
automatically. You will find the images
as follows:
My Computer / Removable Disk /
DCIM / 100IMAGE
Removable Disk
NOTE
Make sure you have installed the USB disk
driver first, if you have Windows 98 operating
system on your PC.
USB cable
Computer's
USB port
41