LG 17LX1R - Manual (Page 12)

12
Installation
DVD Setup DVD Setup
DTV Setup DTV Setup
Connections
1. Connect the DVD video outputs to the COMPONENT (Y, P B ,
P R ) jacks and connect the DVD audio outputs to the AUDIO
jacks.
2. If your DVD only has an S-Video output jack, connect this to
the S-VIDEO input on the TV and connect the DVD audio
outputs to the AUDIO INPUT jacks on the TV, as shown in
the figure.
NOTE: If your DVD player does not have component video
output, use S-Video.
Viewing Setup
1. Turn on the DVD player, insert a DVD.
2. Use the TV/VIDEO or MULTIMEDIA button on the remote
control to select Component (If connected to S-VIDEO,
select the S-Video input source.)
3. Refer to the DVD player's manual for operating instructions.
- To watch digitally broadcast programs, purchase and
connect a digital set-top box.
Connections
Connect the digital set-top box video outputs to the
COMPONENT (Y, P
B , P R ) jacks and connect the digital
set-top box audio outputs to the AUDIO jacks.
Viewing Setup
1. Turn on the digital set-top box. (Refer to the owner’s
manual for the digital set-top box.)
2. Use the TV/VIDEO or MULTIMEDIA button on the
remote control to select Component.
DVD
DTV Receiverr (Set-top Box)
Component ports
of the TV
Y P
B
P
R
Video output ports
of DVD player
Y
Y
Y
Y Pb
B-Y
Cb
P B
Pr
R-Y
Cr
P R
Using Headphones Using Headphones
- Plug headphones in to H/P jack as shown.
- Adjust sound level to a headphone using the volume (
F , G )
buttons. While you are listening to sound through a head-
phone(s), TV speakers will not be heard.
• Component Input ports
To get better picture quality, connect a DVD player to
the component input ports as shown below.