Technical specifications – Lucent Technologies CellPipe 20H-4 User Manual

Page 2

Advertising
background image

To learn more about our comprehensive
portfolio, please contact your Lucent
Technologies Sales Representative or
Lucent Business Partner, or visit our web
site at www.lucent.com.

This document is provided for planning
purposes only, and does not create,
modify or supplement any warranties
which may be made by Lucent
Technologies relating to the products
and/or services described herein. The
publication of information contained in
this document does not imply freedom
from patent or other protective rights of
Lucent Technologies or third parties.

CellPipe is a registered trademark of
Lucent Technologies Inc.

Copyright © 2003
Lucent Technologies Inc.
All rights reserved

Cell v1.0104

Technical Specifications

(continued)

Description Specifications

1.Modes

IP router, IP bridge, DNS relay

2.Ports

SHDSL WAN (RJ-11)

SHDSL with PAM16 line coding (ITU-G.991.2
Annex A and Annex B) supports wedding
current range from 0.3mA to 3mA

Ethernet LAN (4 x RJ-45)

4 x Ethernet IEEE 802.3 (switch),
10/100Base-T auto sensing

3.Firewall

Masquerading (NAT/PAT) compliant to
RFC 1631; DNS forwarding.

4.Quality of Service

ATM QoS support UBR, CBR, VBR-nrt
VPI Range (0-4095) and VCI range
(1-65535)
Up to 8 PVCs in bridge and 5 PVCs
in routing mode

OAM F4/F5 loop back support

5.LAN protocols

IP:

IP, ICMP, UDP, TCP, TFTP, RIP-1, RIP-2,
DHCP, DNS, SNMP, HTTP, HTTPS

6.WAN protocols

PPPoE (RFC2516), PPPoA (RFC2364)
(PAP and CHAP supported), and IP over
ATM over SHDSL (RFC 2025/RFC1577),
Multiprotocol over ATM (RFC2684/RFC
1483), IPoA (RFC 2225/RFC1577),
PPPoE (RFC2516)

7.Transmission rates

LAN (maximum)

100 Mbps, full duplex operation

WAN (maximum)

CellPipe

®

20H 144 kbps up to 2.3 Mbps

rate adaptive in both directions

CellPipe

®

20H-4 144 kbps up to 4.6

Mbps rate adaptive in both directions

8.Management

Outband

Command-line interface, serial V.24

Inband

Telnet or SNMP management via SNMP
V1, WAN or LAN access

TFTP for firmware upgrade

9.Hardware

Power adapter

12 V/DC, external power adapter

Enviroment

Temperature 5–45 °C; humidity 0–95 %;
non-condensing

Housing

200 x 169 x 40 mm (B x H x T), robust
plastic case, ports on the back, prepared
for wall mounting

Approvals

EMC: CE EN300386 & FCC Part 15 class B

Safety: EN60950 & CB

Advertising
This manual is related to the following products:

20H