Lenoxx Electronics CD-895 - Manual (Page 11)

IB-CD895(CDX25H-60K8)-WM-E-042004
The tracks (songs) on the disc can be programmed (arranged in advance) to play in
any order you prefer (up to 20 tracks can be programmed).
Programming Example:
Program Number 1 2 3 4 5 6 7 8
Track Number (song number) 3 5 8 1 2 4 1 1
etc.
etc.
PROGRAMMED PLAY
During programming, the word PROG flashes in the display. To program songs to play
in your preferred order, follow steps below:
1.Press the PROGRAM button.
The word PROG and “ ” will flash in the
display.
2.Press the SKIP/SEARCH button ( or
) to select track number 3 (example).
PROG and track number “03” will flash in
the display.
3.Press the PROGRAM button to confirm.
Track 3 is now programmed.
Program number 2 will now show in the
display, ready for your next selection of
track.
4.Repeat steps 2 and 3 to program other
tracks till you finish (up to 20
selections).
NOTE:
- The player will stop automatically after
all programmed tracks have been
played.
- To quit programmed play, press the
STOP button once. Then you may press
the PLAY button to re-start normal play.
5.After programming is finished, press the
PLAY button to begin programmed play.
The word PROG changes to be steadily
on in the display, and music begins to
play in the order you programmed.
Track number
Program number
Your programmed memory will be
lost:
• When the alkaline batteries are
exhausted or removed, or the optional
AC ADAPTOR is disconnected.
• When the power is shut off.
10
IB-CD895(A2358)-WM-E-042004.P65 4/21/2004, 1:43 PM 11