Lowrance electronic GlobalMap 4800M - Manual (Page 105)

99
If you select yes, there are two options: A. You can spell out the city
name in the top selection box. Press
↑ or ↓ to change the first letter, then
press
→ to move the cursor to the next letter and repeat until the name
is correct, then press ENT | ENT . B. Jump down to the lower selection list
by pressing ENT , then press
↓ or ↑ to select a city name from the list,
then press ENT . The city name you selected is now in the city field.
NOTE:
We recommend that you do not enter a city name unless the list you
are given is too large when searching without it. This unit can ac-
tually search quicker without a city and you save time by not en-
tering a city name.
Find City field, left, Search in particular city only option, center; Find
City by name, right.
6. When the necessary search fields are filled in, press
↓ to
F IND A D-
DRESS
| ENT . You unit asks you to wait while it searches for the address.
(If an address is not in the database, a message appears saying the ad-
dress could not be found.)
7. The unit will display a list of addresses. If the address you are look-
ing for is highlighted at the top of the list, press
ENT . If not, use
↓ and ↑
to select the correct address from the list, then press ENT . The Map
Page will then appear with the location selected by the cursor. (In the
example below, we are looking for 12303 East 11th Street in Tulsa, not
11th Court, so we had to scroll down the list to select the right one.)