Logic 3 RM-DN2 - Manual (Page 13)

• Press the 'play' button'.
• The first track of the collection of MPEG files will be played.
Note: special specific track playback activated by assigned button can also be performed in
sleep mode - contact local sales office.
*The Autoplay and Sleep playback mode are selected when writing the MPEG files on to the
CompactFlash Card by using DV Studio Advanced software.
C) AUTO-LOOP PLAYBACK
After Track 1 is set to play, it will play to the end, then Track 2 will start playing from
beginning to end, then Track 3 etc. When the MV-FLASH M3+ plays to the end of the last
track, it will automatically jump back to the beginning of Track 1, repeating tracks 1,2 then 3
etc. The MV-FLASH M3+ will play in auto-loop play mode, so long as none of the function
buttons are pressed. (NOTE: Loop playback is the standard playback setting of the MV-
FLASH M3+ but the track playback sequence can be changed as required: contact local
sales office.)
- 13 -