LG 32CL40 - Manual (Page 44)

W
A
T
C
H
IN
G
T
V
/
C
H
A
N
N
E
L
C
O
N
T
R
O
L
44
TURNING ON THE TV
WATCHING TV / CHANNEL CONTROL
NOTE !
Press the CH ( or ) or NUMBER buttons to select a channel number. 1
VOLUME ADJUSTMENT
CHANNEL SELECTION
Press the VOL (+ or -) button to adjust the volume.
If you want to switch the sound off, press the MUTE button.
You can cancel the Mute function by pressing the MUTE or VOL (+ or -)
button.
Adjust the volume to suit your personal preference.
1
2
3
G If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
G If you do not complete the Initial setting, it will appear whenever the TV is switched on until the Initial
setting procedure is completed.
G If the TV is unplugged once or turn off with the AC power control switch on the TV, reset the Clock function.
First, connect power cord correctly.
And switch the
AC power control switch on TV (Except 32/42/47CL40).
At this moment, the TV switches to standby mode.
■
In standby mode to turn TV on, press the , INPUT , CH ( DE or ) button on the TV or press the
POWER , INPUT , CH ( or ) , Number (0~9) button on the remote control.
Select the viewing source by using the INPUT button on the remote control.
■
This TV is programmed to remember which power state it was last set to, even if the power cord is out.
When finished using the TV, press the POWER button on the remote control. The TV reverts to standby
mode.
1
2
3