Lindy USB MiniCam - Manual (Page 10)

Configuration
Webcam Panel (named depending on your webcam) - Image Settings
Click here to switch between the
Image and Digital Zoom settings.
Here, you can change the Gamma,
Exposure time and White Balance
settings. For most purposes, the
default settings should not need to
be changed. If you make changes
you can click the Default button to
restore the default settings.
You can select a different video capture
resolution from the drop-down list.
These check boxes allow you to
flip and rotate the image.
This setting allows you to switch
the infra red LEDs on or off.
Note: infra red LEDs are not visible
to the naked eye.
Change the frequency to
reduce monitor flicker