Listen Technologies LA-101 - Manual (Page 10)

FM Receivers
9
FM Receivers
Listen’s LR-100 Stationary Receiver / Power Amplifi er is a
stationary auditory assistance receiver with a built-in power
amplifi er. When used with a Listen transmitter, the LR-100 can
deliver high quality audio for use in a variety of locations and
applications – most commonly soundfi elds. This unit has Listen’s
signature Look&Listen™ LCD Display showing channel, lock, and
battery level. A security cover protects auxiliary and receiver
volume and trim controls. It has an adjustable squelch control,
and balanced or unbalanced speaker wire output options.
Multiple input options give this unit great fl exibility.
It’s powered by a 16VAC/1000mA power input or 12 VDC
battery. Add an antenna for longer range applications.
• Super Quiet™ Technology provides superior audio quality.
• Look&Listen™ LCD.
• 57-programmable channels.
• Adjustable squelch control.
• Selectable audio output.
• Multiple input and output options.
Highlights
• The LA-326 Universal Rack Mounting Kit can
rack mount one or two LR-100 Stationary FM
Receivers (includes security cover).
• Receiver range from LT-800 Antenna: Line
of site, 1,500 ft (457 m) / 3,000 ft (914 m),
72/216MHz.
• Number of simultaneous channels: 6/3,
72/216MHz.
• System audio performance: 63 Hz - 15KHz
frequency response, >80dB SNR and <2% THD.
• Speaker Output: 15/10 wats (peak/RMS) with 4
ohm load.
LR-100-072 - 72MHz
LR-100-216 - 216MHz
NOTE: Not available in 863MHz.
Key Specifi cations
Confi gurations
Accessories
1. Audio Section Audio can be adjusted for volume and quality via trim pots and switches. Listen
exclusive technology delivers low noise performance.
2. Receive Section Use the UP and DOWN buttons to select the transmission channel. The LCD
conveniently shows the selected channel, transmitter output power, lock and programming status.
3. Monitor Section You can listen to the transmitted audio using the monitor jack and volume control.
4. Speaker Volume Adjustable volume control for speaker output.
5. Audio Output Section Off ers three diff erent output options: unbalanced/phono, balanced male XLR
and Phoenix connector for speaker.
6. Audio Input Section Three diff erent audio inputs: RF signal through the antenna, unbalanced/phono
or balanced/female XLR 1/4 inch combo connector.
7. Power Connect a power supply (included) to the back of the unit.
1
6 5
2 3 4
7
6