Linksys WAG160N - Manual (Page 21)

Chapter4
Advanced Configuration
 Wreless-N ADSL2+ Gateway
Applications and Gaming > Single Port
Forwarding
The Single Port Forwarding screen allows you to customize
port services for common applications.
Applications and Gaming > Single Port Forwarding
When users send these types of requests to your network
via the Internet, the Gateway will forward those requests
to the appropriate servers (computers). Before using
forwarding, you should assign static IP addresses to the
designated servers.
Single Port Forwarding
To forward a port, enter the information on each line for
the criteria required.
Applcaton Enter the name you wish to give the
application. Each name can be up to 12 characters.
External and Internal Port Enter the external and
internal port numbers.
Protocol Select the protocol used for this application,
either TCP or UDP.
IP Address For each application, enter the IP address of
the computer that should receive the requests.
Enable For each application, select Enable to enable
port forwarding.
Click Save Settngs to apply your changes, or click Cancel
Changes to cancel your changes.
Applications and Gaming > Port Range
Forwarding
The Port Range Forwarding screen allows you to set up
public services on your network, such as web servers,
ftp servers, e-mail servers, or other specialized Internet
applications. (Specialized Internet applications are any
applications that use Internet access to perform functions
such as videoconferencing or online gaming. Some Internet
applications may not require any forwarding.)
Applications and Gaming > Port Range Forwarding
When users send these types of requests to your network via
the Internet, the Gateway will forward those requests to the
appropriate servers (computers). Before using forwarding,
you should assign static IP addresses to the designated
servers.
If you need to forward all ports to one computer, click the
DMZ tab.
Port Range Forwarding
To forward a port range, enter the information on each
line for the criteria required.
Applcaton In this field, enter the name you wish to give
the application. Each name can be up to 12 characters.
Port Range Start and End Enter the number or range of
port(s) used by the server or Internet applications. Check
with the Internet application documentation for more
information.
Protocol Select the protocol used for this application,
either TCP or UDP, or Both.
IP Address For each application, enter the IP address of
the computer running the specific application.
Enable Select Enable to enable port forwarding for the
applications you have defined.
Click Save Settngs to apply your changes, or click Cancel
Changes to cancel your changes.