Spk-ipt2000, User manual, Getting started – Laser SNOOZE MASTER SPK-IPT2000 User Manual
Page 6: Operating the snooze master
SPK-IPT2000
USER MANUAL
5
GETTING STARTED
GETTING STARTED
Installing the backup batteries (Optional)
• Remove the battery compartment lid on the underside of the Snooze Master.
• Insert 2 X AAA batteries (not supplied).
• Replace the compartment lid.
Note: When there’s a power outage, clock setting will be maintained. The Snooze Master
will not fully function when running on the backup batteries. Battery power support is for
maintaining clock only, and does not support music play.
Plugging the AC adaptor
• Turn the switch on the wall power outlet OFF.
• Plug in the AC adaptor to the wall power out let.
• Connect the AC adaptor to the SPK-IPT2000 Snooze Master
• Turn the wall power outlet ON.
OPERATING THE SNOOZE MASTER
Setting the Clock
Auto Time Sync
The SPK-IPT2000 Snooze Master clock feature will automatically sync when an iPhone/iPod
is docked.
Manual Time Adjust
1.
Press the TIME SET button for 2 seconds to change the display from 12 to 24Hr.
• In 12Hr format, AM or PM is shown on the LCD display.
2.
Press the TIME SET button briefly so the hour display flashes.
3.
While the display is flashing, rotate the SET -/+ wheel to adjust the hour.
4.
Press the TIME SET button again so the minute display flashes.
5.
While the display is flashing, rotate the SET -/+ wheel to adjust the minute.
6.
Press the TIME SET button to confirm and exit clock settings.
7.
The LCD display will return to normal after 2 seconds from last change.