LG LFD21860 - Manual (Page 25)

USING YOUR REFRIGERATOR
25
FILTER
It displays in months the number of months left to
exchange the filter from the moment power is connected
to the refrigerator.
If you have changed the filter after 6 months of use, press
and hold the FILTER button 3 seconds or more and the
filter display will be initialized with a buzzing sound.
NOTE: The average life of the filter is 6 months.
1. Remove the old cartridge.
Place a container under the hole of filter holder.
NOTE: When filter is being removed, the water drains
through the hole.
Rotate the knob of the cartridge counter clockwise.
Pull out the filter cartridge.
2. Replace with a new cartridge.
Take the new cartridge out of its packaging and remove
protective cover from the o-rings.
With cartridge knob in the vertical position, push the new
filter cartridge into the cover until it stops.
If you can’t turn the filter from side to side, it isn’t fully
inserted. Push it in firmly and twist it into place. You will
hear the snap when it clicks into place.
Using its handle, twist the cartridge clockwise about 1/4
turn. You will hear the snap when it clicks into place.
3. Flushing the Water System After Replacing Filter
Dispense water through the water dispenser for 3 minutes
to purge the system.
NOTE: To purchase replacement water filter cartridges,
visit your local appliance dealer or part distributor. You
can also visit our website: www.lgappliances.com or call
1-877-714-7481. The replacement water filter cartridge’s
part number is 5231JA2006B.