Lindy Webcam - Manual (Page 9)

© LINDY ELECTRONICS LTD Installation & Use English – English Guide Page 5
Installation
The system configuration of the LINDY VGA Converter Plus is shown below:
Rear view of the LINDY VGA Converter Plus
CONNECTOR DESCRIPTION
DC 9V
Power supply jack to provide power to the LINDY VGA Converter Plus
Input: DC 9V
SCART
Video output option for connecting to TV (Also provides PC keyboard
interface cable to support for Page Up/Down functions)
S-VHS S-VHS video output option for connection to TV
COMPOSITE
VIDEO
C.V. output option for connection to Video or TV
VIDEO Composite video output for connection to TV
VGA OUT Connect the Y cable to this connector
Connecting the LINDY VGA Converter Plus to graphic video output
♦
Turn off your computer and its peripherals
♦
Place the LINDY VGA Converter Plus next to your computer
♦
Attach the end of the Y-cable marked “MONITOR” to your monitor cable.
♦
Plug the end of the Y-cable marked “VGA CARD” into you computers PC Graphic output.
♦
Plug the end of the Y-cable marked “ENCODER” into the VGA Converter Plus
For Macintosh:
An optional Mac to PC adapter may be required with some models of Macintosh computers.
Special Note for Laptop users
Some notebooks or laptops with LCD display screens can’t
support simultaneous LCD and external monitor display.
When connecting to an external computer monitor, you
should switch the display to external monitor port. Please
check your computer documentation regarding how to
enable the external monitor port.