LevelOne WBR-3407 11g - Manual (Page 19)

WBR-3407 User Guide
Wireless Screen
The WBR-3407's settings must match the other Wireless stations.
Note that the WBR-3407 will automatically accept both 802.11b and 802.11g connections, and
no configuration is required for this feature.
To change the WBR-3407's default settings for the WBR3407 feature, use the Wireless link on
the main menu to reach the Wireless screen. An example screen is shown below.
Figure 8: Wireless Screen
Data - Wireless Screen
Identification
Regulatory
Domain Select the correct domain for your location. It is your responsibility to
ensure:
• That the WBR-3407 is only used in domains for which is licensed.
• That you select the correct domain, so that only the legal channels
for that domain can be selected.
Station name This is the same as the "Device Name" for the WBR-3407.
SSID
(ESSID)
• If using an ESS (Extended Service Set, with multiple access
points) this ID is called an ESSID (Extended Service Set
Identifier).
• To communicate, all Wireless stations should use the same
SSID/ESSID.
16