La Crosse Technology WS-7034U - Manual (Page 6)

6
Battery
Cover
ADDITIONAL EQUIPMENT
(not included)
1. 1 Philips screwdriver.
2. 2 Fresh AAA Alkaline batteries.
3. 2 Fresh AA Alkaline batteries
DETAILED SETUP GUIDE
Battery Installation
1.
Install 2 AA
batteries in the
remote temperature
sensor. Make sure
they do not spring
free, or start-up
problems may occur.
2. Install 2 AAA
batteries in the
indoor temperature
station. Do not
press any buttons
for at least ten
minutes.