Linksys EFVCD20 User Manual

Page 5

Advertising
background image

Instant GigaCD Server

Copy Button

This button is pressed to copy a CD to the hard disk, thus creating a virtual
CD image. While copying, you may experience difficulty using the Server’s
other features and should wait until the Server has completed copying the
image.

Copied CD images will be saved to the default AutoCab folder. You can
change this folder in the Manager Utility, under the Configuration/System
menu option.

Pressing the Copy button while copying an image will cancel the copying
procedure.

The LAN Indicators

Ready

Green. This will blink during Startup and Shutdown and turn off
once completed. During a software upgrade, both the Ready and
Error LEDs will blink.

Error

Amber. This LED with blink during Startup. However, if it
remains on, there is a hardware error. During a software upgrade,
both the Ready and Error LEDs will blink.

LAN

Green. While data is being sent or received over your network,
this LED will flash.

Disk

Green. This LED will flash whenever the hard drive is accessed.

Disk Full

Green. This LED will normally be off. It will begin to blink to
indicate that the hard drive is 98% full and remain on to indicate
that the hard drive is completely full.

Copy Error Amber. This LED will normally be off. Should an error occur

during the image copying procedure, this LED will remain on
until the CD is ejected.

5

EtherFast Series

10BaseT LED (green)

This will illuminate when a successful
10BaseT connection is made to Your Network
through the 10/100BaseTX port.

Reset IP/Password Button

If the Instant GigaCD Server’s IP Address or
password is lost, press and release this button.
The Server will beep once to indicate that a
new IP Address (192.168.0.2, with a Network
Mask of 255.255.255.0) has been provided.
This function will also clear the GigaCD’s
passwords and rights.

Uplink Button

If the Server is going to be connected directly
to a PC, make sure this button is pushed in.
If, however, the Server is going to be connect-
ed to a network (normal operation), this but-
ton should not be pushed in.

The Instant GigaCD Server’s Front Panel

el

4

Advertising