Lincoln Electric PRECISION TIG 185 - Manual (Page 23)

C-2 ACCESSORIES C-2
FIELD INSTALLED OPTIONS
The following Options/Accessories are available for
the PRECISION TIG 185:
• K2348-1 Under-Storage Cart
Includes a front magnetic latch storage drawer and
rear storage bin on a single bottle undercarriage.
(L12225 Installation Instructions included)
• K870 Foot Amptrol
Single pedal foot activation of arc start switch and
output control, with 25 ft.(7.6m) plug cable.
• K870-1 Start Pedal Foot Amptrol
Independent start pedal on control pedal provides
two-stage foot action to easily feel start switch clo-
sure at minimum output level for enhanced arc start
and crater-fill control. Provided with adjustable, or
removable , heel stop and 25 ft.(7.6m) plug cable.
• K963-3 Hand Amptrol
Fastens to torch for convenient thumb activation of
arc start switch and output control, with 25 ft.(7.6m)
plug cable:
• K814 Arc Start Switch
Needed for TIG welding without an Amptrol.
Includes 25 ft.(7.6m) plug cable, and attaches to
torch for convenient finger control.
• TIG-Mate Torch Starter Kits:
Includes Torch with Twist-Mate adapter and acces-
sories listed below:
K2266-1 TIG-Mate Torch Starter Kit Includes:
• 150A PTA-17 12.5 ft.(3.8m) Torch
• KP508 Parts Kit
• Regulator & Hose
• K1622-1 Twist Mate Torch Adapter
• Work Cable & Clamp (Not required for PRECISION
TIG 185)
K2267-1 TIG-Mate 20 Torch Starter Kit Includes:
• 200A PTW-20 12.5 ft.(3.8m) Torch
• KP510 Parts Kit
• Regulator & Hose
• K1622-4 Twist Mate Torch Adapter
• Water Hose & Hose Coupler
• Work Cable & Clamp
(Not required for PRECISION TIG 185)
• Magnum “Pro-Torch™ TIG Torch” assemblies and
Accessories.
Requires Twist-Mate Adapter:
K1622-1 for PTA-9/-17
K1622-3 for PTA-26
K1622-4 for PTW water cooled torch
• Harris #3100211 Harris Argon Flow Regulator
(Includes 10 ft.(3.1m) hose.)
• K2374-1 Electrode Holder and Cable
200 amp Electrode Holder with 10 ft.(3.1m) cable
and Twist-Mate connector.
PRECISION TIG 185