Hookup and settings, Rear panel – LG LRA-516 User Manual
Page 14
14
a ANT.IN
Connect the antenna to this terminal.
b AUDIO OUT (Left/Right)
Connect to a TV with audio inputs.
c VIDEO OUT
Connect to a TV with video inputs.
d COMPONENT VIDEO OUT/PROGRESSIVE
SCAN (Y Pb Pr)
Connect to a TV with Y Pb Pr inputs.
e Cooling fan
f AC Power Cord
Plug into the power source.
g RF. OUT
Connect to a TV with RF coaxial inputs.
h S-VIDEO OUT
Connect to a S-Video Input on TV.
i AUDIO IN (Left/Right)
Connect the audio output of an external source
(Audio system, TV/Monitor, VCR, Camcorder).
j VIDEO IN
Connect the video output of an external source
(Audio system, TV/Monitor, VCR, Camcorder).
k AUDIO OUT (Left/Right)
Connect to a TV with audio inputs.
l COAXIAL (Digital audio out jack)
Connect to digital (coaxial) audio equipment.
m OPTICAL (Digital audio out jack)
Connect to digital (optical) audio equipment.
a
b
c
d
e
f
g
h
i
j
k
l m
Rear Panel
Hookup and Settings
Depending on your TV and other equipment there are various ways you can connect the
recorder. Please refer to the manuals of your TV, VCR, Stereo System or other devices as nec-
essary for additional connection information.
Notes:
•
Make sure the Recorder is connected directly to the TV and tune the TV to the correct video input channel.
•
Do not connect the Recorder’s AUDIO OUT jack to the phono in jack (record deck) of your audio system.
Do not connect the Recorder via another VCR. The DVD image could be distorted by the copy protection system.
•
The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. Position the units away from each
other or turn off the unit after removing the disc.