6 lsi21003 host adapter, Figure3.6 lsi21003 mechanical drawing, Lsi21003 host adapter – LSI Ultra160 User Manual
Page 36: Lsi21003 mechanical drawing
3-8
Ultra160 SCSI to PCI Host Adapter Characteristics
3.2.6
LSI21003 Host Adapter
The LSI21003 PCI to Dual Channel Ultra160 SCSI host adapter
(
provides 16-bit LVD and SE SCSI solutions for your
computer. Channel A supports only the SE mode, while channel B
supports LVD and SE modes of operation.
The LSI21003 host adapter has these features:
•
Ultra SCSI Wide SE for channel A to 40 Mbytes/s per data transfer;
Ultra160 SCSI for channel B to 160 Mbytes/s per data transfer
•
Four connectors
–
One external 50-pin high density connection
–
Two internal 68-pin high density connections
–
One internal 50-pin low density legacy connection for channel A
•
Channel A is SE only with autosense termination
•
Channel B is SE or LVD with termination permanently enabled
Figure 3.6
LSI21003 Mechanical Drawing
Note:
•
J1: PCI 32-bit, universal type board edge connector.
•
J2 and J5: 68-pin high density shielded latching right-angle internal connectors.
•
J3: 50-pin high density shielded right-angle external connector.
•
J4: 50-pin low density shrouded vertical internal connector.
•
J6: 4-pin low density unshrouded right-angle LED connector.
•
Subsystem Vendor ID is 1000.
•
Subsystem ID is 1050.
J6 LED J5 Channel B - Ultra160 SCSI LVD/SE
B Terminators
A Terminators
LSI53C1010
J1 - PCI
J3
Channel A
Ultra SCSI
J2 Channel A - Ultra SCSI Wide SE
J4 Channel A - Ultra SCSI Wide SE
Wide SE