LevelOne FNS-1000 - Manual (Page 26)

LAN Screen
This screen allows you to set the IP Address and related information required for TCP/IP networks.
LAN (TCP/IP) Screen
IP Address
Obtain IP Address
automatically
(DHCP Client) Do NOT select this unless you have a DHCP Server on your
LAN. A DHCP Server can provide an IP Address to PCs and
other devices when they boot.
Fixed IP
Address Select this if your LAN does not have a DHCP Server, and enter
the following data.
IP Address:
(Default:192.168.0.100)
The IP Address must be unused, and compatible with the PCs on
your LAN. Usually, this means the first 3 fields should be the
same as your PC, and the last field must be an unused number
between 1 and 254.
Network Mask:
(Default:255.255.255.0)
Enter the same Network Mask (Subnet Mask) used by PCs on
your LAN.
Gateway (Router):
Default: None
If your LAN has a Router or Gateway, enter its IP Address here.
Otherwise, leave this blank.
DHCP Server
Enable Use this to Enable/Disable the DHCP Server. If you already
have a DHCP Sever, do not enable this feature.
Start Address Enter the beginning of the range of IP Addresses to be allocated
by the DHCP Server. Generally, the first 3 fields of the IP
Address must match the NAS Server's IP Address. The 4th field
must be between 2 and 250.
Finish Address Enter the last address of range of IP Addresses to be allocated
by the DHCP Server. The first 3 fields must match the corre-
sponding field in the "Start IP Address".
DNS Server
Primary IP Address of the first DNS Server.
Backup IP Address of the DNS Server to be tried if the first server is
busy.
Page 24