LG WD-10210BD - Manual (Page 13)

12
• Use this option to prevent
unwanted use of the washer.
Press and hold Quick Cycle and
Delay Wash button for 3 seconds
to lock / unlock control.
• When Child lock is set, “ ” blinks
and all buttons are disabled but
the Power button. You can
thereby lock the washer while
it is operating.
• Prewash : Use this option for loads that need pretreatment.
It adds 16 minutes prewash and drain.
• Stain Cycle : Adds time to the wash and rinse cycles for
better stain removal. Automatically provides a
rinse.
• Quick Cycle : The Quick cycle offers a quick cycle time.
• Extra Rinse : This option provides an additional rinse cycle.
• Rinse+Spin : Use this option to rinse and then spin.
• Delay Wash : Allows the start of any cycle to be delayed for
1~19(12, 9) hours.
• Use this button to Start /
Stop the washer.
/ Off.
on the type of
e
setting is
Soil Level
splayed.
• These lights show elapsed time of the
selected cycle.
• This display shows :
a) the estimated time remaining in the cycle when
operating.
b) an error code when an error has been detected.