Using the fm/am radio, English – Panasonic SB-PM48 User Manual

Page 9

Advertising
background image

9

8

ENGLISH

RQTX0192

9

8

1

Press [FM/AM] to select “FM” or “AM”.

2

Press [TUNE MODE] to select “MANUAL”.

3

Press [u/t] or [y/i] to select the frequency of the
required station.

ST” is displayed when a stereo FM broadcast is being received.

To tune automatically
Press [u/t] or [y/i] for a moment until the frequency starts
changing rapidly. The unit begins auto tuning, stopping when it finds a
station.

Auto tuning may not function when there is excessive interference.
To cancel auto tuning, press [u/t] or [y/i] once again.


Press [FM MODE] to display “MONO”.

To cancel
Press [FM MODE] again until “MONO” disappears.

MONO is also cancelled if the frequency is changed.
Turn off “MONO” for normal listening.


Up to 30 stations can be set in the FM band and 15 stations in the
AM band.

Preparation
Press [FM/AM] to select “FM” or “AM”.

1

Press [PLAY MODE] to switch between “LOWEST” or
“CURRENT” frequency.

2

Press [AUTO PRESET] to start presetting.

1

Press [TUNE MODE] to select “MANUAL”.

2

Press [u/t] or [y/i] to tune to the required station.

3

Press [PROGRAM].

4

Press numeric buttons to select a channel.
The station occupying a channel is erased if another station is
preset in that channel.

5

Repeat steps 2 to 4 to preset more stations.

Press numeric buttons to select the channel.
OR
1

Press [TUNE MODE] to select “PRESET”.

2

Press [u/t] or [y/i] to select the channel.

Using the FM/AM radio

Memory preset

FM/AM

Automatic presetting

Selecting a preset station

Manual presetting

To improve FM sound quality

FM

MODE

AUTO

PRESET

TUNE

MODE

Manual tuning

FM/AM

TUNE

MODE

FM allocation setting

By main unit only
This system can also receive FM broadcasts allocated in 0.1 MHz steps.

To change the step to 0.1 MHz

1

Press and hold [FM/AM].
After a few seconds the display changes to a flashing display of the
current minimum frequency.

2

Continue to hold down [FM/AM].

When the minimum frequency changes, release the button.
To return to the original step, repeat the above steps.
After the setting is changed, any previously preset frequency will
be cleared.

FM/AM

TUNE

MODE

8

9

SC-PM38_PP_En_081230 (pg 1-17).indd 9

2/25/2009 4:28:37 PM

Advertising
This manual is related to the following products: