Panasonic SV-PT1PP - Manual (Page 33)

33
TV Mode
1
Do Steps 1~3 on page 32. In Step 3,
select “SET CONTENTS”, then press
SET.
2
Press to select a folder, then
press SET.
• Folder contents will be displayed.
3
Press to select “SLIDE SELECT”,
then press SET.
• Selecting “RETURN” displays previous slide.
4
Press to select a slide, then
press SET.
• Pressing SET again cancels selection.
• “ ” appears at bottom, right corner of a
selected slide.
• Repeat Step 4 until all slides to be displayed
are selected. Presentation will be in the order
slides were selected.
5
Press MENU when selection is
complete.
6
Press to select “YES”, “CONTINUE”
or “CANCEL”, then press SET.
• YES : To finish selection.
• CONTINUE: To continue selection.
• CANCEL
: To cancel selection and return
to menu.
To unselect images:
Press
to select “RELEASE”, then press
SET.
• The selected images are returned to the their
original state.
To preview the presentation contents
(REHEARSAL):
Press
to select “REHEARSAL”, then
press SET.
• Each slide will appear approx. 2 seconds.
• Pressing CANCEL will cancel this operation.
• Pressing SET will pause this operation.
• When the number of saved files is great, it may
take time to go into Pause/Stop mode.
7
Press to select “RETURN”, then
press SET.
• To proceed with presentation, return to
Step 3 on page 32.
TV Mode (Presentation)
Selecting Presentation Content
You can select specific slides from the index to be displayed. If you wish to include all
images in the index, this procedure is not necessary.
PT1.p29-33.p65 2003/01/14, 12:37 33