Planet Technology WL-U357v2 - Manual (Page 14)

2.2 Hardware Installation
1. After PC restart. Please select the correct Country Domain in the pull down
list and press “OK” to continue.
2. Please connect WL-U357 to your PC’s USB port. If your PC’s USB interface
is not USB 2.0, Windows will prompt you there is a High-Speed device
connect to non-High-Speed USB hub. Please don’t worry about this and
keep installing.
3. After properly connect the WL-U357 to your PC, Windows will detect
WL-U357 and show you this dialog box. You can see the device name in this
dialog box. If the device name is correct, please press”Next” to the driver
installation.
4. Windows may show you this driver is not passed Windows Logo test, please
10