Planet Technology WGSW-2620PV - Manual

WGSW-2620PV
24-Port 10/100Mbps/PoE + 2G TP/SFP
Combo Ethernet Switch
Key Feature
Data Sheet
1
P reliminary Release June 2005
The PLANET WGSW-2620PV PoE Switch features Power-over-Ethernet
(PoE), which optimizes the installation and power management of network
devices such as wireless access points (AP), Voice over IP (VoIP) phones, and
security video cameras. Power-over-Ethernet (IEEE 802.3af) capabilities
reduce installation costs for many new network productivity devices. It
frees the wireless AP deployment from restrictions due to power outlet
locations. Power and data switching are integrated into one unit and
delivered over a single cable, eliminating costs for additional AC wiring and
reducing installation time.
With twenty-four 10/100Mbps RJ-45 ports, two GbE copper ports and two
shared SFP / copper GbE interface, PLANET WGSW-2620PV boasts a high
performance switch architecture that is capable of providing non-blocking
switch fabric high as 8.8Gbps. Its four built-in GbE uplink ports also offer
incredible extensibility, flexibility and connectivity to the Core switch or
Servers.
The IEEE 802.3af standard-based firmware provides a rich set of features
and ensures interoperability with equipment from other vendors.
Additionally, the firmware includes advanced features such as IGMP
snooping, broadcast storm control, and MAC address filtering, to enhance
security and bandwidth utilization.
With its built-in web-based management, the PLANET WGSW-2620PV
offers an easy-to-use, platform-independent management and
configuration facility. The PLANET WGSW-2620PV supports standard
Simple Network Management Protocol (SNMP) and can be managed via
any standard-based management software. For text-based management,
the WGSW-2620 can also be accessed via Telnet and the console port.
An optional power supply, the USP-400, can be chosen as UPS or
redundant power for WGSW-2620PV. The WGSW-2620 can take electrical
power from the AC outlet, the UPS-400 and both for redundant. The UPS-
400 supports 400 watts of electrical power, once the AC power shut off,
the UPS-400 then take over as the UPS power supply for WGSW-2620PV
and keep the switch and the connected powered devices working.
• 24-Port 10/100Mbps TP ports with PoE injector
• 2G TP/SFP combo interface
• Complies to IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX/FX,
IEEE 802.3ab 1000BASE-T, IEEE 802.3z Gigabit fiber, IEEE
802.3af power over Ethernet
• High backplane bandwidth 8.8Gbps
• IGMP snooping and IGMP Query mode for Multi-media
application
• Port mirror and bandwidth control
• Supports GVRP function
• End point insert mode remote power feeding
• Provides extra DC 48V input with redundant function and
management power status through RS-232 port
• On line extra power supply testing through RS-232 port
• Management by Web/SNMP/Telnet/Console
• Port Based VLAN / IEEE 802.1Q Tag VLAN
• IEEE 802.3x Flow control - flow control for full duplex, back
pressure for half duplex
• IEEE 802.3ad Port trunk with LACP
• Spanning tree protocol IEEE 802.1d/ IEEE 802.1w
• IEEE 802.1p class of service
• IEEE 802.1x user authentication, TACACS+
• Broadcast storm filter
• DHCP client/DHCP relay
• Support command line interface management
• System event log support