Pioneer AVH-P7850DVD - Manual (Page 5)

9
English
Español
Deutsch
Français
Italiano
Nederlands
PyÒÒÍËÈ
7
Connecting the Units
Connecting the power cord (2)
TEXT 006 xxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxx
Fig. 4
Front speaker
(MID/FRONT
OUTPUT)
Rear speaker
Front speaker
(MID/FRONT
OUTPUT)
Rear speaker
White
White/black
Gray
Gray/black
Green
Green/black
Violet
Violet/black
Hilde-away unit (supplied)
+
≠
+
≠
+
≠
+
≠
+
≠
+
≠
+
≠
+
≠
Left Right
Tweeter
(FRONT HIGH
OUTPUT)
Front center speaker
(FRONT CENTER
OUTPUT) Rear center speaker
(REAR CENTER
OUTPUT)
Tweeter
(FRONT HIGH
OUTPUT)
White
White/black
Gray
Gray/black
Black/white
Black
Black/white
Black
WARNING
Violet/white
See the section “When
connecting with a rear view
camera”.
Note:
• The position of the parking brake switch depends
on the vehicle model. For details, consult the
vehicle Owner’s Manual or dealer.
Connection method
1. Clamp the lead. 2. Clamp firmly with
needle-nosed
pliers.
Light green
Used to detect the ON/OFF status of the parking brake.
This lead must be connected to the power supply side of the parking
brake switch.
TEXT 007
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Power supply side
Ground side
Black (ground)
To vehicle (metal) body.
Yellow
To separately sold power
supply wiring kit (RD-221).
(See page 5.)
Fuse (10 A)
Fuse (10 A)
Parking brake
switch
LIGHT GREEN LEAD AT POWER CONNECTOR IS DESIGNED TO DETECT
PARKED STATUS AND MUST BE CONNECTED TO THE POWER SUPPLY SIDE
OF THE PARKING BRAKE SWITCH. IMPROPER CONNECTION OR USE OF THIS
LEAD MAY VIOLATE APPLICABLE LAW AND MAY RESULT IN SERIOUS
INJURY OR DAMAGE.
Fuse (4 A)
Blue/white
To system control terminal of the power
amp or Auto-antenna relay control
terminal (max. 300 mA 12 V DC).