Planet Technology DVR-400 - Manual (Page 24)

20
HDD SETUP
OVERWRITE ENABLED:
If you choose “YES”, DVR-400 will continue recording and overwrite the recorded data when HDD’s space is
full
If you choose “NO”, the unit will stop recording while HDD’s space is full
MASTER HDD SIZE:
Display the capacity of the installed HDD in DVR-400
MASTER HDD USED:
Display the percentage of HDD’s capacity has been used
MASTER HDD FORMAT:
Erases all the recorded data in harddisk
The machine admin password is required before formatting, after the unit formatted, the message “HARD
DISK FORMATTED” will appear on the screen.
SENSOR SETUP
SENSOR RECORD TIME:
Recording duration (in seconds) when sensor is triggered.
ALARM OUT TIME:
The ALARM TIME OUT controls how long (in second) the alarm sounds after being triggered.
SENSOR TRIGGER MODES:
HARD DRIVE SETUP
OVERWRITE ENABLED [YES]
MASTER HDD SIZE 40000MB
MASTER HDD USED 0MB 0%
MASTER HDD FORMAT
SLAVE HDD SIZE N/A
SLAVE HDD USED N/A
SLAVE HDD FORMAT
PRESS (Щ,Ъ), THEN (SELECT)
PRESS (MENU) TO EXIT
SENSOR SETUP
SENSOR RECORD TIME 05
ALARM OUT TIME 00
CHANNEL-1 TYPE: NORMAL -OPEN
CHANNEL-2 NOT INSTALLED
CHANNEL-3 NOT INSTALLED
CHANNEL-4 NOT INSTALLED
PRESS (Щ,Ъ), THEN (SELECT)
PRESS (MENU) TO EXIT