Maintenance, Lubrication – Polaris 600 EDGE Touring 121 User Manual

Page 90

Advertising
background image

87

MAINTENANCE

Lubrication

Lubricate the suspension and steering components with Polaris

Premium All-Season Grease at 500 miles (800 km) and

annually or every 1000 miles (1600 km) thereafter. See page 134

for the part numbers of Polaris products.
The illustration shows the location of suspension and steering

components. A + indicates a grease point or fitting.
S

Grease the left and right spindles. Raise the front end of the ma-

chine to permit better grease entry into the spindle area.

S

Lubricate both of the front ski pivots at the fittings as shown.

S

Grease the jackshaft and driveshaft clutch side bearings.

S

Use an aerosol lubricant on the steering post support bracket.

S

Grease the center steering arms.

S

Grease the steering post lower pivot.

S

Grease the rear suspension pivot shafts (raise the rear of unit).

A grease gun kit, complete with grease and adaptors, is available to

lubricate all fittings on Polaris snowmobiles. See page 134.

+

+

+

+

+

+

Advertising