Panasonic DMC-LC33PP - Manual (Page 92)

Others
92
Troubleshooting
1: The power does not turn on.
1-1: Are the batteries inserted? Check
whether the batteries are inserted.
1-2: Is the battery power sufficient?
2: As the power is turned on, it turns
off immediately.
2-1: Is the battery power insufficient to
operate the camera? Replace it with
new one.
2-2: Are the batteries other than the
recommended ones?
3: The image cannot be recorded.
3-1: Is the Memory Card inside?
3-2: Is the mode dial correctly set?
Check it.
3-3: There is no memory capacity left on
the card. Before recording, delete
some images.
4: The image is not displayed on the
LCD monitor.
4-1: Is the LCD monitor set to OFF?
4-2: Does the economy mode work?
5: The LCD monitor is too bright or
dark.
5: Adjust the brightness of the LCD
monitor.
6: Flash does not light.
6: The flash mode is set to forced OFF.
Change the flash mode.
7: The display or images on the LCD
monitor are not focused.
7: Set the mode dial to the mode
corresponding to the distance to the
subject.
8: The image will not play back.
8-1: Is the Memory Card inside?
8-2: There is no image in the Memory
Card.
8-3: The mode dial is not set to playback
[ ].
9: The image is not displayed on the
television.
9-1: Is the camera correctly connected
with the TV? Check it.
9-2: Set the TV to video input mode.
10: When connecting to a PC, images
cannot be transferred.
10-1: Check that the camera is correctly
connected to the PC.
10-2: Is the camera correctly recognized
by the PC?
11: The clock setting is reset.
11-1: If you do not use the camera for a
long time, the clock setting may be
reset. When the message [PLEASE
SET THE CLOCK] appears, set the
clock again.
11-2: When you take a picture before
setting the clock, [0.0.0 0:00] is
recorded.
KC52-PP.book 92 ページ ２００３年３月１３日 木曜日 午後２時２９分