Panasonic PT-50LC14 - Manual (Page 39)

39
Basic Operation
Swapping left and right screens
Example:
During SPLIT SCREEN NORMAL
&+ &+
Changing the channel of the right screen
&+
Press to swap.
Example:
During SPLIT SCREEN NORMAL
Note:
• When outside input is fi nished, the low est reg is tered
chan nel number is displayed. For fast er selection,
press the SWAP but ton to change the screen to the left.
Then, press the TV/VIDEO but ton to directly change
the input. Finally, press SWAP button again to change
the screen back to the right.
Press to select the desired
channel.
SPLIT CH ▲, ▼ buttons can also be used to select
an outside input for the right side of the screen.
* If SKIP is set as
the Input Label
setting of SETUP,
the mode will
not be changed.
(P. 52)
Note:
• Picture quality may change according to the
combination of signals input to the left and right
screens.
Split screen
CH 125
VIDEO 1 *
VIDEO 2 *
VIDEO 3 *
COMPONENT 1 * COMPONENT 2 *
HDMI*
COMPONENT 4 *
COMPONENT 3 *
CH 01
or
CABLE
125 TV
69