Pacific Digital Digital Pacific USB Digital Photo Frame MemoryFrame User Manual
Page 51
MemoryFrame User’s Manual
Copyright© 2002 Pacific Digital Corporation
Page 48
Figure 22 – Examples of wood frames
Size of Frames that Fit MemoryFrame
The frames can be of various dimensions, but they must fit 5” x 7”
pictures. The inner dimensions of frames that fit are approximately
11.9cm x 17 cm. The outer dimensions of the frames that work can vary
by as much as 2 cm in each direction. For example, as you can see in
the Figure 22, the rear-middle frame shown is slightly wider and taller
than the rest and this is fine.
Types of 5 x 7 Frames that Fit MemoryFrame
In general, most 5 x 7 frames come in three different basic types in terms
of how the photo and the stand mechanism are retained (secured) into the
frame. These three types are briefly described below. The first two
types are not usable by MemoryFrame, and only the third type described
will fit MemoryFrame:
1. Some 5x7 frames supply retention for the photo and the stand
mechanism by having metal clips attached to the wood itself which
either swivel or bend over the stand mechanism to provide retention.
Please note, that MemoryFrame cannot use this type of frame,
so purchase only type #3 below.
2. The second type of 5x7 frames have a slot in the bottom such
that the glass, picture, and stand-mechanism all slide up from the
bottom of the frame. Please note, MemoryFrame cannot use this
type of frame, so purchase only type #3 below.