Maintenance, Oil and filter change – Polaris Sportsman 9920374 User Manual

Page 82

Advertising
background image

79

MAINTENANCE

Oil and Filter Change

9. Place shop towels beneath the oil

filter. Using an oil filter wrench
(available from your Polaris
dealer), turn the filter counter-
clockwise to remove it.

10. Using a clean dry cloth, clean the

filter sealing surface on the
crankcase.

11. Lubricate the o-ring on the new filter with a film of fresh engine oil.

Check to make sure the o-ring is in good condition.

12. Install the new filter and rotate it clockwise by hand until the filter

gasket contacts the sealing surface, then turn it an additional 1/2
turn.

13. Remove the dipstick.

14. Add two quarts (1.9 l) of recommended oil.

15. Place the transmission in PARK.

16. Lock the parking brake.

17. Start the engine. Allow it to idle for one to two minutes.

18. Stop the engine.

19. Check for leaks.

20. Check the oil level. Add oil as needed to bring the level to the upper

mark on the dipstick.

21. Dispose of used filter and oil properly.

Advertising