Panasonic KX-TAW848 - Manual (Page 15)

1.1 Before Operating the Telephones
User Manual 15
When You Use a Panasonic Proprietary Telephone
If you use a Panasonic proprietary telephone and the Console, they may have some of the useful
feature buttons described below. For a PS user, refer to "Operating Instructions" for PS. These
buttons make operations simple. The illustrations may differ from the buttons on your telephone.
Fixed Buttons
CO:
Used to make or receive an outside
call. (Button assignment is required.)
Also used as feature buttons. (Button
assignment is required.)
(Only the CO line "number" [e.g., 1, 2]
may be shown on some telephones.) SP-PHONE:
Used for hands-free operation.
AUTO DIAL/STORE:
Used for System/Personal Speed
Dialing or storing program changes. PAUSE:
Used to insert a pause when storing a
telephone number. This button also
functions as the PROGRAM button
when there is no PROGRAM button on
your telephone.
REDIAL:
Used to redial the last dialed number. MESSAGE:
Used to leave a message waiting
indication or call back the party who left
the message waiting indication.
INTERCOM:
Used to make or receive intercom
calls. AUTO ANS (Auto Answer)/MUTE:
Used to receive an incoming call in
hands-free mode or mute the
microphone during a conversation.
MONITOR:
Used for hands-free dialing. You can
monitor the party’s voice in hands-free
mode. HOLD:
Used to place a call on hold.
TRANSFER:
Used to transfer a call to another party. CONF (Conference):
Used to establish a multiple party
conversation.
FLASH/RECALL:
Used to disconnect the current call and
make another call without hanging up. Call Forwarding (FWD)/Do Not
Disturb (DND):
Used to perform Call Forwarding
(FWD) or Do Not Disturb (DND).
(CO)
SP SP-PHONE
MONITOR MONITOR
FLASH/RECALL