Specifications – Panasonic PT-D3500U User Manual

Page 58

Advertising
background image

58

Specifications

1

Value when accessory lens is used, “PICTURE MODE” is set at “DYNAMIC” and zoom lens is in the wide lens
position.

2

HDCP (High-bandwidth Digital Content Protection)

HDCP is a digital video signal encryption system developed with the aim of protecting digital content.

Power supply

AC 120 V, 50 Hz/60 Hz

Power consumption

400 W (about 10 W in standby without fan running)

DLP

TM

panel

Panel size
Display system
Number of pixels

0.7 inch (aspect ratio 4:3)
DMD

TM

element, DLP type

786 432 pixels (1 024 x 768 dots)

Lens

Powered zoom
Powered focus control

1 to 1.32
F=1.7 to 2.0 f=25.6 mm (1") to 33.8 mm (1.3")

Projection lamp

1 bulb x 300 W UHM lamp

Optical output

3 500 lm

1

Applicable scanning frequency

For video signal (S-video included)
For RGB signal

For DVI-D signal

For YP

B

P

R

signal

Horizontally 15.73 kHz/15.63 kHz, vertically 59.94 Hz/50 Hz
Horizontally 15 kHz–91 kHz, vertically 50 Hz–85 Hz,
Panasonic Intelligent Auto Scanning (PIAS) system
Dot clock frequency Less than 108 MHz
Compliant with HDCP

2

EDID1: 480p, 576p, 720/60p, 1080/60i, 1080/50i
EDID2: VGA480/60, SVGA/60, XGA/60, XGA/70, XGA/85, SXGA/60
[480i], horizontally 15.73 kHz, vertically 59.94 Hz
[480p], horizontally 31.5 kHz, vertically 59.94 Hz
[576i], horizontally 15.63 kHz, vertically 50 Hz
[576p], horizontally 31.25 kHz, vertically 50 Hz
[720/60p], horizontally 45 kHz, vertically 60 Hz
[1035/60i], horizontally 33.75 kHz, vertically 60 Hz
[1080/60i], horizontally 33.75 kHz, vertically 60 Hz
[1080/50i], horizontally 28.13 kHz, vertically 50 Hz
• HD/SYNC, VD terminals are not compliant with 3 value composite SYNC.

Contrast ratio

1 600:1 (when “HIGH” is selected as the “CONTRAST MODE” setting)

Color system

7 standards (NTSC/NTSC4.43/PAL/PAN-N/PAL-M/SECAM/PAL60)

Screen size

50 inch–600 inch

Screen aspect ratio

4:3

Projection scheme

Menu-selectable from front/rear/ceiling mount, and floor standing

Interface ports

RGB1 input terminal

1 set, BNC x 5
[For YP

B

P

R

input]

Y: 1.0 V[p-p] synchronization signal included, P

B

P

R

: 0.7 V[p-p] 75

[For RGB input] 0.7 V[p-p] 75

For G-SYNC: 1.0 V[p-p] 75

HD/SYNC: TTL, high-impedance, positive/negative polarity

automatically adjusted

VD: TTL, high-impedance, positive/negative polarity automatically

adjusted

• However, HD/SYNC, and VD terminals are not compliant with 3-value

direct SYNC.

Advertising