Removing the lcd section and the led pcb, Removing the pcb case unit, Removing the bottom case unit and the handle unit – Panasonic CF-72 User Manual
Page 44: Removing the cd-rom drive, 8 removing the pcb case unit, 10 removing the cd-rom drive
6 - 4
6.8
Removing the PCB Case Unit.
<A>
<B>
<A>
<A>
<A>
PCB Case Unit
Figure 16
1. Remove the six screws <A>, and two screws <B>.
2. Remove the PCB case.
Screw <A>: XYN2+J12FZ
Screw <B>: XYN2+J16FN
6.9
Removing the Bottom Case Unit
and the Handle Unit.
Figure 17
1. Remove the two screws <D>, and two screws <F>.
2. Remove the bottom case unit, and remove the handle
unit.
Note : When reassemble the bottom case unit, install the power
knob before installation of the bottom case unit.
Screw <D>: XTB2+16GFN
Screw <F> : XTB26+20GFN
6.10 Removing the CD-ROM Drive.
CD-ROM Drive
Release the Connector
Figure 18
1. Release the connector to remove the CD-ROM drive.
6.7
Removing the LCD Section and
the LED PCB.
<G>
LED PCB
LED
LED Section
<S>
<S>
Figure 15
1. Remove the two screws <S>, and remove the LCD unit.
2. Remove the two screws <G>, and remove the LED PCB.
Screw <S>: DFHE5025XA
Screw <G>: DXHM0021ZA
Handle Unit
<D>
<D>
<F>
<F>
Bottom Case Unit
Power knob