Planet Technology VIP-462DG - Manual (Page 14)

Please locate your PC in the same network segment
(192.168.0.x) of VIP-462DG. If you’re not familiar with
TCP/IP, please refer to related chapter on user’s manual
CD or consult your network administrator for proper network
configurations.
Í
Note
LAN/WAN Interface quick configurations
Nature of PLANET VIP-462DG is an IP Sharing (NAT) device, it comes with two default IP addresses,
and default LAN side IP address is “192.168.0.1”, default WAN side IP address is “172.16.0.1”. You
may use any PC to connect to the LAN port of VIP-462DG to start machine administration.
In general cases, the LAN IP address is the default gateway
L
Hint
of LAN side workstations for Internet access, and the WAN
IP of VIP-462DG is the IP address for remote calling party
to connect with.
LAN IP address configuration via web configuration interface
Execute your web browser, and insert the IP address (default: 192.168.0.1) of VIP in the adddress bar.
After logging on machine with password (default: 123), browse to “LAN” configuration menu:
Parameter Description
IP address LAN IP address of VIP-462DG
Default: 192.168.0.1
Subnet Mask LAN mask of VIP-462DG
Default: 255.255.255.0
After confirming the modification you’ve done, Please click on the Apply button to macke the changes
effective.
14