Supplied accessories, Connections, English – Panasonic SC-HC30 User Manual

Page 4

Advertising
background image

RQTX1066

RQTX1066

4

ENGLISH

RQTX1066

RQTX1066

2

1

AUX

Connections

g

Notes on speakers

These speakers do not have magnetic shielding. Do not place
them near televisions, personal computers or other devices easily
influenced by magnetism.
The speaker nets cannot be removed.

4

5

Tape the antenna to a wall or column, in a position with the
least amount of interference.

Connect the FM indoor antenna.

1

FM indoor antenna

Adhesive tape

Back View

Exhaust holes

4

5

1

2

3

2

Connect the AM loop antenna.

Stand the antenna
up on its base.

Click!

AM loop antenna

Keep the loose antenna cord away from other wires and cords.

3

Connect the AC power supply cord after all other connections
are complete.

Connect the AC power supply cord.

To household AC outlet

Avoid listening for prolonged periods of time to prevent hearing
damage.
Excessive sound pressure from earphones and headphones can
cause hearing loss.
Listening at full volume for long periods may damage the user’s
ears.
Be sure to use the supplied or recommended headphones or
earphones.

Reduce the volume level and connect the headphones.
Plug type: 3.5 mm (1/8") stereo

Headphones (not included)

4

Portable audio equipment (during AUX mode)

5

AUX

Plug the audio cord into the AUX jack.

Plug type: 3.5 mm (1/8") stereo

Press [AUX] and start playback from the

portable audio source.

You can select the sound input level of the portable audio
equipment.
Press [INPUT LEVEL] repeatedly to select “HIGH” or
“NORMAL”.

Switch the equalizer off or turn the volume of the portable
equipment down to reduce the input signal. High level of input
signal will distort the sound.
For details, refer to the instruction manual of the other equipment.
Cords and equipment are not included.


AC IN

“Made for iPod” means that an electronic accessory has been
designed to connect specifically to iPod and has been certified by the
developer to meet Apple performance standards.
“Works with iPhone” means that an electronic accessory has been
designed to connect specifically to iPhone and has been certified by
the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards.
iPod is a trademark of Apple Inc., registered in the U.S. and other
countries. iPhone is a trademark of Apple Inc.

or

MPEG Layer-3 audio decoding technology licensed from Fraunhofer
IIS and Thomson.

Supplied accessories

Please check and identify the supplied accessories.

Use numbers indicated in parentheses when asking for

replacement parts. (Product numbers are correct as of
January 2010. These may be subject to change.)

To order accessories, refer to “Accessory Purchases
(United States and Puerto Rico)” on page 15.

1 AC power supply cord
(K2CB2CB00021)

1 AM loop antenna
(N1DYYYY00010)

1 FM indoor antenna
(RSAX0002)

2 Batteries

1 Remote control (N2QAYB000522)

Screw accessories (RFAX1020)

2 Fixing screws
(XYN3+J10FJ)

1 Safety holder
(RMKX1015)

Wall bracket accessories (RFAX1021)

1 Wall bracket
(RGQX1004)

Four-legged cushions
(RKAX0028-K)

B

The included AC power supply cord is for use with this unit only. Do
not use it with other equipment.
Do not use an AC power supply cord of other equipment.

Advertising