Planet Technology PL-401E - Manual (Page 9)

6
Chapter 4 Encrypting Your Powerline Network
4.1 PowerPacket Configuration Utility Installation
1. Insert the CD-ROM into the CD-ROM drive to initiate the autorun program. Once completed,
a menu screen will appear as follows:
2. To install the utility, click on the "PowerPacket Configuration Utility" hyperlink in PL-401E
field to activate the installation procedure for the application program.
If the above screen is not shown, you can start the installation as follows.
• Click on Start Menu/ Run.
• Enter “E:\Utility\PL-401E\setup.exe” in the appeared box, where “E” is the letter of your
CD-ROM drive.
• Click on “OK” button.
3. On the Welcome screen, click the Next button.